Because this is a dash made for the racing application the mounting can be fabricated in many ways.

         

1.   If you have a cage with front down bars then you can come off of them with tabs and use duz fasteners (3 recommended per side) and use the tunnel supports with (2 duz fasteners) coming up to the dash center. 

             

Click on photos to enlarge

2.  If you don't have a cage with front down bars you can can weld one brackets coming off the fire wall and two brackets coming off the original bottom dash mount. Two brackets coming up from the tunnel (original mounting plates) weld or bolt. Make sure to add support on the bottom dash mount. One bracket with two mounts and one bracket with one mount. You can use nuts and bolts - weld the nuts to the bracket or use Duz fasteners. (3 recommended per side)

              

 

Click on photos to enlarge

 

Copyright © 1998 [PDK Fabrication]. All rights reserved